3G SAS host connectivity
Dual Domain support with HP Smart Array
P800 Controller for HP ProLiant and Integrity servers (requires dual port SAS
drives) (single environment only)
Multi Initiator support with the SC44Ge
Host Bus Adapter (AH303A) (HP-UX and Open VMS on selected HP Integrity Servers)
with dual port SAS drives only
Supports twenty five 2.5 inch hot
pluggable drives
Supports HP 6G SAS Dual-port disk drives,
(146 GB, 300 GB, 600 GB & 900 GB capacities)
Supports HP 6G SAS Dual-port Midline
(MDL) disk drives (500 GB & 1 TB capacities)
Supports HP SATA 3G disk drives, (500 GB
& 1 TB capacities)
Maximum storage capacity of 22.5 TB (with
twenty five 900 GB 6G DP SAS), 25 TB (with twenty five 1 TB 6G SAS DP MDL)
or 25 TB (with twenty five HP SATA 3G 1
TB hard drives)
Attached to HP SC44Ge Host Bus Adapter
for HP-UX and Open VMs support on selected HP Integrity Servers (servers that
support PCI-e cards)
Supports attachment of up to three (3)
dual I/O MSA70 behind a Small Form Factor MSA2000 G2 (99 SFF drives for a total
of 59.4TB SAS or 24.7TB SATA) (NOTE:
MSA70 is NOT supported behind a MSA2000 G2 (LFF)).Supports MS Windows
2003, Microsoft Windows 2008, Red Hat
Linux, SUSE Linux, VMware, Novell NetWare, HP-UX 11iv2 and 11iv3, Open VMS
8.3 1H
Supports attachment of up to five (5)
dual I/O MSA70 behind a Small Form Factor P2000 G3 (149 SFF drives for a total
of
89.4TB SAS or 74.5TB SAS MDL or SATA )
(NOTE: MSA70 is NOT supported behind a P2000 G3 (LFF))
1+1 Cascade support (behind a single SAS
port)
Supports boot from storage
Redundant hot-plug power supplies and
fans standard
Addition of second I/O Module adds Dual
Domain capability providing higher level of redundancy and reliability
